Setcoat® Designer Colors
This superior bonding paint is an easy to apply wall paint and basecoat for all decorative finishing work including color glazing. It is an excellent furniture and refinishing paint as well, no paint stripping required, and can be used on metal furniture and laminates. It has superb bonding and sealing qualities and can be used for both interior and exterior applications. Unlike common latex paints, the high grade proprietary resins used in this material allows it to bond to most surfaces and can be hand rubbed to a satin patina, or even be wet sanded to a feather edge. It is low in VOC content and friendly to the environment. Soap and water clean up.
Clean off dust and clean the old surface before applying SetCoat® (For cabinets, furniture, and Formica finishes, sand the old surface with 220 grit sandpaper then roll, brush or spray on SetCoat®). When dry to the touch, second or multiple coats can be applied. If spraying, SetCoat® can be thinned with water if needed, but it is not necessary with most professional spray painting equipment. For roll-on applications, use high quality sponge or short nap rollers. Finish roll in one direction, especially with metallic paint versions. For brush applications, use a fine quality brush made for water-based paints. Finish brush in one direction with light brush pressure. SetCoat® is available in a wide selection of paint colors, metallics, as well as a bonding paint tinting base.
Covers Approximately 200 - 400 sq ft per gallon
Sold in quarts, gallons and 5 gallon pails
Download The SDS Sheet